30w type c Adapter for Samsung
Generally speaking, the true no-load voltage of ordinary Replacement AC Adapter may not be completely consistent with the nominal voltage, because the characteristics of electronic components cannot be completely consistent, so there is a certain error, the smaller the error, the higher the consistency requirements for electronic components The cost of production is higher, so the price is more expensive.
Both have the same nominal voltage and different output currents. Can they be used on the same laptop?
The laptop Power Supply voltage is the same, the output current is different, can it be used on the same notebook. The basic principle is that a power supply with a large nominal current can replace a power supply with a small nominal current. Some people may think this way, thinking that a laptop AC Adapter with a large nominal current will burn the notebook because the current is high. In fact, the current depends on the load under the same voltage. When the notebook is under high-load operation, the current is larger. When the notebook enters standby, the current is smaller. The Computer Charger with a large nominal current has sufficient current margin. On the contrary, it is no problem to use a 56w replacement ac adapter instead of 72w, because the design of the Power Adapter usually has a certain margin, and the load power should be less than the power supply, so this replacement is feasible in general use. However, the remaining power supply margin is very small. Once you have connected a lot of peripherals, such as two USB hard drives, and then the CPU runs at full speed, there is a base, and an optical drive reads the disk at full speed. Charging the battery is probably dangerous. Therefore, it is best not to replace high-current power supplies with low-current AC Power Adapter.
Product Description :
| Specifications |
| Model No. | YSA014 |
| AC Input |
| Nominal Input Voltage | AC 100V~240V |
| Input Voltage Range | AC 95V~265V |
| Input Frequency | 50/60Hz |
| DC Output |
| Output Voltage& current | 15V2A/9V3A/5V3A |
| Output Power | 30W |
| DC Connector Size | NEW TYPE C |
| Line Regulation | 2% |
| Load Regulation | 5% |
| Ripple Noise | 180 Mvp-p |
| Efficiency | >85% |
| Output Cable Standard | 0.5mm2, OD 4.0mm Pure Copper |
| Output Cable Length | 2m normally or customized requirement |
| Environment |
| Operating Temperature | 0°C ~40°C |
| Operating Humidity | 5%~95%RH |
| Storage Temperature | -20°C ~85°C |
| Storage Humidity | 5%~95%RH |
| Protection |
| Over Load Protection | Short Circuit Protection |
| Over Current Protection | Over Temperature Protection |
| Certificates |
| CE, FCC,ROHS |
| Dimensions |
| Adapter Size | 65*65*29 MM(not including the AC plug) |
| Ac plug length | 40mm |
| Adapter Weight | 160G |
| Inner Box Size | 19*13*4.7 CM |
| Inner Box Weight | 40G |
| PCS/CTN | 50PCS |
| Outer Carton Size | 48.5*32*40 CM |
| Outer Carton Weight | 860G |
| GW/CTN | 10860G |
| Package |
| Inner Box | Normally neutral brown box or customized requirement |
| Outer Carton | Normally neutral standard carton or customized requirement |
| Warranty |
| Guarantee | 30 days |
| Warranty | 2 years |
| Terms and Conditions |
| MOQ | 100PCS for mixed order |
| Payment Terms | T/T, L/C, PayPal, western union |
| Delivery Time | 3-5 days |
| Manufacturing Process |
| 1. Set-Up→2. Hand Insertion→3. Wave Soldering→4. Touch-Up→5. V/I→6. ICT→7. INT→8. Apply Glue→9. Q/A→10. Entering Stock→11. Assembly→12. Power On Test→13. Hi-Pot Test→14. Burn-In→15. Hi-Pot Test→16. All Fun Test→17. Packing→18. OQC→19. Shipping |
| Test Procedures |
| 1.No-load output voltage test→2.input power load test→3.No-load output ripple test→4.Full load open test→5.Full load output voltage test→6.Full load output ripple test→7.Full load input power test→8.Half load output voltage test→9.Half load output ripple test→10.Over load test→11.Over current protection test →12.Short circuit protection test (above test is under both 110V and 230V.)→13.High voltage test→14. burn-in test→15.Turn on delay time test→16.Rise time test→17.Hold time test→18.Overshoot test |
Product Picture:
Company Information:
Professional test to control quality:
We have a series of professional test from raw material~unfinished products~finished products to control the quality seriously, each adapter make 100% check before delivery out.
Certification:
Our Exhibition in all the world:
Our Services:
Good quality & low wholesale prices
•Concentrating on the R&D, production and sales of laptop adapters for almost all computer brands for over 10 years, with CE/ROHS/FCC/ERP.
•High quality laptop adapters with OCP/OVP/SCP/OTP protection
•Offering the original manufacturer prices.
•Strict QC & perfect after-sales services
•Controlling every process from the procurement of raw materials, assembling, test, improvement, till the finished products.
•1 year warranty, regular after-sales tracking, professional related technology instruction.
•We can support you with customized logo and package.
Contact Now
